Roland MV-8800

Creating a new song
M-147
MV-8800 Owner’s Manual
Recording a song / pattern
9
Your favorite settings such as the track structure or loop settings of a song can be stored on the hard disk as
a “template” for recall any time you want to start creating a song with that structure.
● Saving a User Track Template
1.
For the current song, create the structure that you want to save as a user track template.
2.
Press [SONG].
The SONG screen (Screen Guide; p. 8) will appear.
3.
Press [MENU].
The MENU popup will appear.
4.
Select “Save As User Template” and press [F5](Select).
“Save Song setting as User Track Template?” message will appear.
fig.track-mute-screen
● Using a user track template to create a song
1.
Press [SONG].
The SONG screen (Screen Guide; p. 8) will appear.
2.
Press [F1](Song Menu).
The SONG MENU screen (Screen Guide; p. 78) will appear.
3.
With the cursor located in the upper row of icons, press [F3](Create New). Alternatively,
you can select the CREATE NEW SONG icon and press [ENTER].
The CREATE NEW SONG screen (Screen Guide; p. 83) will appear.
4.
Set the Track Layout parameter to “User Template.”
5.
Press [F5](Execute).
A new song will be created according to the settings saved in the user track template.
Starting a new song with your favorite settings (User Track Template)
● Only one user track template can be stored.
● Since the user track template is stored on the hard disk, it will be lost if you initialize (format) the hard disk.
F-button
Explanation
[F1](No)
The user track template will not be saved. The SONG screen will appear.
[F5](Yes) Things such as the track settings for the current song will be saved on the hard disk as a user track
template.
MV-8800_e.book 147 ページ ２００６年１１月１０日 金曜日 午後１時４８分