Roland MV-8800

Editing a region you specify (Sequence Editing)
M-174
MV-8800 Owner’s Manual
Here’s how to insert blank measures at the specified measure location.
1.
Access the SONG screen (Screen Guide; p. 8) or the PATTERN screen (Screen Guide; p. 91).
2.
Press [F5](Seq Edit).
The SEQUENCE EDIT screen (Screen Guide; p. 31) will appear.
3.
Use MEAS [ ] [ ] to move the current time you want to insert blank measures.
4.
Press [MENU].
The MENU popup will appear.
5.
Select “Insert Measure” and press [F5](Select).
The INSERT MEASURE popup will appear.
fig.quick-region
6.
Specify the measure number at which you want to insert blank measures, and the desired
number of measures.
• To
Specify the insert-destination measure number.
• For
Specify the number of blank measures you want to insert.
• Time Signature
Specify the time signature of the measures you want to insert.
7.
Press [F5](Execute).
The blank measures will be inserted.
Inserting blank measures at the specified time (Insert Measure)
● If you want the tempo track settings, marker settings, and locator settings for time locations following the
inserted blank measures to be moved backward as well, select the Tempo, Marker, and/or Locator check boxes.
MV-8800_e.book 174 ページ ２００６年１１月１０日 金曜日 午後１時４８分