Roland MV-8800

Panel descriptions
M-25
MV-8800 Owner’s Manual
Panel descriptionsIntroduction
CD-R/RW drive tray
The tray will open when you press the CD-R/RW disc
eject button. This drive can handle CD-ROMs and music
CDs, and can also write data to CD-R discs or CD-RW
discs.
Disc access indicator
This indicator will light when the disc is being read or
written.
● Never remove the disc while the disk access indicator is lit.
Doing so will damage the data and/or the disc.
Emergency disc eject hole
This is an emergency eject switch for the CD-R/RW disc.
If the power has been turned off (e.g., due to a power
failure), the tray will not open when you press the
CD-R/RW disc eject button. In this case, you can eject the
tray by pushing a straightened paper clip into this hole.
● Never use the emergency disc eject hole to eject the disc
while the MV-8800 is operating. Doing so will damage the
disc and/or the drive, and may make the disc jump out of the
tray.
CD-R/RW disc eject button
Press this button to open the CD-R/RW disc tray.
● If the MV-8800’s internal system is accessing the CD-R/RW
drive, pressing this button may not eject the CD tray. This is
a safety feature, not a malfunction.
CD-RW Drive (Front Panel)
MV-8800_e.book 25 ページ ２００６年１１月１０日 金曜日 午後１時４８分