M-234
MV-8800 Owner’s Manual
Playing an audio CD
Now let’s use the MV-8800’s CD Player function to hear the audio CD you just created.
1.
Insert the audio CD into the CD-R/RW drive as described in Inserting a disc (p. 31).
2.
Press [DISK/USB].
The DISK/USB MENU screen (Screen Guide; p. 188) will appear.
3.
Press [F4](CD Player). Alternatively, select the CD PLAYER icon and press [ETNER].
The CD PLAYER screen (Screen Guide; p. 195) will appear.
4.
Use the following buttons to control the CD.
●
Make sure that the disc is firmly seated in the CD-R/RW drive tray. If the disc is not correctly in position, it may
catch inside the drive and may be impossible to remove.
●
We cannot guarantee that playback will occur correctly with “copy-protected CDs,” which do not comply with
the audio CD specification. If you want to use the MV-8800’s CD Player function to play back an audio CD,
carefully check the package of the audio CD.
●
You can use the CD Player function to play commercial audio CDs or audio CDs written to a CD-RW disc.
●
Use the MASTER knob to adjust the overall volume.
●
Pressing [F5](Eject) will open the CD-R/RW drive tray.
●
You can press [F2](Reset Peak) to reset the peak indicator of the level meter.
●
You can press [F1](Display) to switch the time display format. The screen indicates the displayed format as well
as the time. The default setting is “Track Time.”
Select the track
Rewind
Fast-forward
Return to the beginning of the CD
Start CD playback
Stop CD playback
Previous track
Next track
Move between tracks
Display format Screen display
Track Time Displays the current time within the track that is playing.
Total Time Displays the total time from the beginning of the CD to the current time location.
Track Remain Displays the time remaining until the end of the currently-playing track.
Total Remain Displays the time remaining until the end of the CD.
MV-8800_e.book 234 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
