Roland MV-8800

M-140
MV-8800 Owner’s Manual
Using the locator
You can assign up to ten locate points in each song.
1.
Press [SONG].
The SONG screen (Screen Guide; p. 8) will appear.
2.
Move to the time location where you want to assign a locate point.
3. Press [LOCATOR].
The LOCATOR popup (Screen Guide; p. 59) will appear.
4.
Move the cursor to the locate number (0–9) you want to set.
5.
Press [F1](Set Now).
The current time will be stored in the specified locate point.
Here’s how to move the current time to a locate point you stored.
1.
Press [SONG].
The SONG screen (Screen Guide; p. 8) will appear.
2.
Press [LOCATOR].
The LOCATOR popup (Screen Guide; p. 59) will appear.
3.
Press the numeric key that corresponds to the desired locate point.
The current time will change.
● You can set a locate point even while the song is playing.
Moving to a locate point
MV-8800_e.book 140 ページ ２００６年１１月１０日 金曜日 午後１時４８分