M-321
MV-8800 Owner’s Manual
Other functions
21
Checking the system status
Here’s how to check the MV-8800’s internal software version, the amount of currently-installed memory, and
the options that are installed.
1.
Press [SYSTEM].
The SYSTEM MENU screen (p. 172) will appear.
2.
With the cursor located in the upper row of icons, press [F5](SysInfo). Alternatively, select
the SYSTEM INFO icon and press [ENTER].
The SYSTEM INFORMATION screen (Screen Guide; p. 181) will appear.
Here’s how to perform a read/write test of the wave memory installed in the MV-8800.
1.
Access the SYSTEM INFORMATION screen as described in “Viewing the system
information” (p. 321).
2.
Press [F1](DIMM Diag).
The display will ask “With Diagnosis, samples on the wave memory will be lost. Save current Project before?”
Viewing the system information
Testing the installed memory
●
There is no way to recover the data that has been erased. (Unless, of course, you have previously made a
backup of that data.) Roland Corporation can accept no responsibility for any loss of data or any damages you
incur as a result of such loss.
F-button
Action
[F1](No)
The message “Samples in wave memory will be lost. Are you really sure?” will appear.
If you press [F5] (Yes), the memory test will be performed without saving the current project.
If you press [F1] (No), the test will be cancelled and you will return to the SYSTEM INFORMATION
screen.
[F5](Yes) Saves the current project, and then executes the Memory Diagnosis operation.
[EXIT] Cancels the operation.
MV-8800_e.book 321 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
