Automating mixing operations (Automation)
M-219
MV-8800 Owner’s Manual
13
Chapter 13
Automating mixing operations
(Automation)
Automating operations of Mixer Channel
The operations of the mixer parameter on the MIXER screens can be recorded on the MIDI track.
Mixer operation data is recorded on a MIDI track as MIDI Control Change data. The following table shows the
data that can be recorded and played back, and the MIDI Control Change numbers used for each type of data.
1.
Access the SONG screen or the PATTERN screen.
2.
Move the current time to the location at which you want to start recording mixer operations.
3.
Use CURSOR [ ] [ ] to select the MIDI track on which you want to record the Mixer
Channel operations (movements).
4.
Press [F2](Track Param).
The TRACK PARAMETER popup (Screen Guide; p. 11) for the MIDI track will appear.
5.
Use the Output Assign parameter to select the Mixer Channel for which you want to
record/playback mixer operations.
The following table shows the Mixer Channel that can be recorded and played back.
Select the “AMix” for which you want to record mixer
operation of Audio track.
Mixer parameters that can be recorded and played back
Parameters
MIDI Control Change Number Parameters MIDI Control Change Number
Level
7 (Volume) Reverb Send 91 (Reverb: Effect 1 Depth)
Pan 10 (Pan) DlyCho Send 93 (Chorus: Effect 3 Depth)
●
You can’t record mixer operations for multiple Mixer Channels at the same time.
●
You can’t record operations of the Output parameter, Mute parameter, and EQ parameters on the MIXER
screens.
Recording mixer operations for a Mixer Channel
●
You can use the SEQUENCE EDIT screen or the EVENT LIST screen to edit a MIDI track on which you
recorded mixer operations.
Mixer Channel
Value Mixer Channel Value
AUX1
Mixer AUX1 Reverb Mixer Reverb
AUX2 Mixer AUX2 Audio Phrase Mixer A.Phrs
AUX3 Mixer AUX3 Input Mixer Input
AUX4 Mixer AUX4 Audio track 1-8 AMix *: (Audio track name)
“*” shows Track Number.
Delay/Chorus Mixer DlyCho
●
When you delete an Audio track, the Output Assign parameter will be switched Off for the MIDI track on which
you recorded the mixer automation operations for that track.
MV-8800_e.book 219 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
