Roland MV-8800 - Page 260

Explanation of screens shown in the external display
M-260
MV-8800 Owner’s Manual
● Tracklist Area
Explanation
Track Number
Display the Track number. You can click here to make that number the current track.
Track Type Icon
This indicates the type of track. You can click here to select or de-select that track.
Track Name
Display the name of the track. When you double-click here, the EDIT TRACK NAME popup
window will appear, allowing you to edit the name of the track.
Track Move
Up/Down button
You can click these to move the current track upward or downward (i.e., change their order).
All Track Select
button
Click this to select or de-select all tracks.
Output Assign
(Instrument)
This indicates the instrument part played by the current track.
Output Assign
(MIDI)
Specifies the MIDI connector and channel used for MIDI output of the data from the MIDI
track.
Output Assign
(Audio)
Specifies the output connector from which the audio recorded on the track will be output.
Mute button
Click this to turn Mute on (yellow) or off.
Solo button
Click this to turn Solo on (light blue) or off.
Record button
Click this to switch the current track.
All Track Mute Off
button
Click this to defeat Mute for all tracks.
All Track Solo Off
button
Click this to defeat Solo for all tracks.
Track Parameter
button
Click this to display the TRACK PARAMETER popup window for the corresponding track.
MV-8800_e.book 260 ページ ２００６年１１月１０日 金曜日 午後１時４８分