Explanation of screens shown in the external display
M-269
MV-8800 Owner’s Manual
Using an external display and mouse to operate the MV-8800
16
❍
SYSTEM
Here you can make system setting for the MV-8800.
1 Global
The GLOBAL popup will appear. Here you can make settings for the overall system of the MV-8800.
2 Pad/Panel
The PAD popup will appear. Here you can make settings for the velocity pads, top panel buttons, knobs, and
sliders.
3 MIDI
The MIDI popup will appear. Here you can make MIDI settings.
4 V-Link
The V-LINK popup will appear. Here you can make V-LINK settings.
5 System Info
The SYSTEM INFORMATION popup will appear. Here you can view information about memory usage and
the status of the installed options.
6 Slider
The ASSIGNABLE SLIDER popup will appear. Here you can specify the functions assigned to the sliders.
7 R-BUS
The R-BUS popup will appear. Here you can make R-BUS settings.
8 Display/Mouse
The DISPLAY/MOUSE popup will appear. Here you can specify the signal that will be sent to the external
display, and adjust the sensitivity of the mouse.
9 Pix Jam
The PIX JAM popup will appear. Here you can register image clips (still image data), and play back the images
along with the music.
❍
DISK/USB
Here you can make settings for the MV-8800’s disk and for USB.
1 File Utility
The FILE UTILITY popup will appear. Here you can manage files by copying, moving, or deleting them.
2 Disk Utility
The DISK UTILITY popup will appear. Here you can check the disk and perform maintenance.
3 USB
The USB popup will appear. This switch the MV-8800 to USB-connection mode, which lets you transfer data
between the internal hard disk and your computer.
4 CD Player
The CD PLAYER popup will appear. Here you can play back an audio CD.
MV-8800_e.book 269 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
