Importing from an audio CD
M-71
MV-8800 Owner’s Manual
Importing data
2
6.
Press [F5](Import).
The SET TIME popup (Screen Guide; p. 225) will appear.
7.
Press [F5](Execute).
The data will be imported, and the RESULT popup (Screen Guide; p. 211) will appear, allowing you to check
the data that was imported. A sample number will be assigned to each imported sample.
The remaining steps are the same as step 6 and following of “Importing the WAV or AIFF files” (p. 65).
●
The SET TIME popup will appear if one CD track is being imported.
●
The sample number is shown above the waveform display.
●
If you want to use the imported data as a patch or audio phrase, use the Quick Assign function in step 8 of
“Importing the WAV or AIFF files” (p. 65). For details, refer to “Playing the imported data immediately (Quick
Assign)” (p. 75).
MV-8800_e.book 71 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
