Roland SH-4d - M Stagephsr (Multi Stage Phaser)

MFX Parameters
103
Parameter
Value
Explanation
Polarity
INVERSE, SYNCHRO
Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Resonance
0–127
Amount of feedback
Feedback
-98–+98 [%]
Adjusts the proportion of the phaser sound that is fed back into the effect.
Negative (-) settings will invert the phase.
S Rate
Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
S.Rate
0.10–20.00 [Hz]
Rate of the step-wise change in the phaser effect
S.Rate Nt
Note(P.167)
Mix
0–127
Level of the phase-shifted sound
Low Gain
-15–+15 [dB]
Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB]
Amount of boost/cut for the high-frequency range
Level
0–127
Output Level
M StagePhsr (Multi Stage Phaser)
Extremely high settings of the phase difference produce a deep phaser effect.
Parameter
Value
Explanation
Mode
4-STAGE, 8-STAGE, 12-STAGE, 16-STAGE, 20-STAGE,
24-STAGE
Number of stages in the phaser
Manual
0–127
Adjusts the basic frequency from which the sound will be
modulated.
Rate Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the
rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Rate
0.05–10.00 [Hz]
Frequency of modulation
Rate Note
Note(P.167)
Depth
0–127
Depth of modulation
Resonance
0–127
Amount of feedback
Mix
0–127
Level of the phase-shifted sound
Pan
L64–63R
Stereo location of the output sound
Low Gain
-15–+15 [dB]
Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB]
Amount of boost/cut for the high-frequency range
Level
0–127
Output Level