Roland SH-4d - Enhncr -> Cho (Enhancer -> Chorus); Enhncr -> Fl (Enhancer -> Flanger)

MFX Parameters
162
Enhncr -> Cho (Enhancer -> Chorus)
Parameter
Value
Explanation
Enh Sens
0–127
Sensitivity of the enhancer
Enh Mix
0–127
Level of the overtones generated by the enhancer
Cho
PreDly
0.0–100 [ms]
Adjusts the delay time from the direct sound until the chorus sound is heard.
Cho Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
C. Rate
0.05–10.00 [Hz]
Frequency of modulation
C.Rate Nt
Note(P.167)
Cho Depth
0–127
Depth of modulation
Cho Bal
D100: 0W–D0:
100W
Adjusts the volume balance between the sound that is sent through the chorus (W) and the
sound that is not sent through the chorus (D).
Level
0–127
Output Level
Enhncr -> Fl (Enhancer -> Flanger)
Parameter
Value
Explanation
Enh Sens
0–127
Sensitivity of the enhancer
Enh Mix
0–127
Level of the overtones generated by the enhancer
Flg PreDly
0.0–100 [ms]
Adjusts the delay time from the direct sound until the flanger sound is heard.
Flg Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
F. Rate
0.05–10.00 [Hz]
Frequency of modulation
F.Rate Nt
Note(P.167)
Flg Depth
0–127
Depth of modulation
Flg Fbk
-98–+98 [%]
Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.