Roland SH-4d - 4 Tap Pandly (4 Tap Pan Delay)

MFX Parameters
136
4Tap PanDly (4 Tap Pan Delay)
This effect has four delays.
Parameter
Value
Explanation
Dly1 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
D1.Time
1–2600
Adjusts the time from the original sound until delay 1 sounds is
heard.
D1Time
Nt
Note(P.167)
Dly2 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
D2.Time
1–2600
Adjusts the time from the original sound until delay 2 sounds is
heard.
D2Time
Nt
Note(P.167)
Dly3 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
D3.Time
1–2600
Adjusts the time from the original sound until delay 3 sounds is
heard.
D3Time
Nt
Note(P.167)
Dly4 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
D4.Time
1–2600
Adjusts the time from the original sound until delay 4 sounds is
heard.
D4Time
Nt
Note(P.167)
Dly1 Fbk
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
HF Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which sound fed back to the effect is
filtered out. If you don’t want to filter out any high frequencies, set
this parameter to BYPASS.
Dly1 Lv
0–127
Volume of each delay
Dly2 Lv
0–127