Roland SH-4d - Inputting a Pattern While the Steps Automatically Advance (Step Input)

Creating a Pattern (Step Sequencer)
58
Inputting a Pattern While the Steps Automatically Advance (Step Input)
1. Hold down the [1]–[16] buttons and press the [START] button to select the step where you want to start
inputting.
The unit enters step input mode, and “Recording” appears on the display.
2. Input the notes using the keyboard buttons or an external keyboard.
The steps automatically advance each time you input a note.
When you press the [PAGE/TIE] button, a tie is input to connect the current step (at the time you pressed the button) to the
previous step.
3. To exit step input mode, press the [EXIT] button.
When you input the last step, step input mode automatically ends.