MFX Parameters
151
Flg Fbk
Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Flg Bal
Adjusts the volume balance between the sound that is sent through the flanger (W) and the
sound that is not sent through the flanger (D).
DS -> Delay (Distortion -> Delay)
Dist Drive
Degree of distortion
Also changes the volume.
Stereo location of the distortion sound
Delay
Sync
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Delay time from when the original sound is heard to when the
delay sound is heard
Delay Fbk
Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
Dly HF
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
Adjusts the frequency above which sound fed back to the effect
will be cut. If you do not want to cut the high frequencies, set this
Dly Bal
Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent through the
OD/DS -> T. Wah (Overdrive/Distortion -> Touch Wah)
Turns overdrive/distortion on/off
Drive
Degree of distortion
Also changes the volume.
Sound quality of the Overdrive effect
Turns the Amp Simulator on/off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
