Roland SH-4d - Phonograph

MFX Parameters
145
Phonograph
Recreates the sound of an analog record being played on a record player.
This lets you simulate the unique noises produced when a record is played, as well as the variations that occur when the record
spins.
Parameter
Value
Explanation
Signal Dist
0–127
Sets the amount of distortion.
Frequency Range
0–127
Sets the frequency characteristics of the playback system.
Smaller values create the feeling of an older system with narrow frequency bands.
Disc Type
LP, EP, SP
Sets the turntable rotation speed.
This has an effect on the scratch noise cycle.
Scratch NZ Lev
0–127
Sets the volume of noise created by scratches in the record.
Dust NZ Lev
0–127
Sets the volume of noise created by dust on the record.
Hiss NZ Lev
0–127
Sets the volume of continuous hiss noise.
Total NZ Lev
0–127
Sets the volume of noise overall.
Wow
0–127
Sets the amount of variation in record spin (long cycle).
Flutter
0–127
Sets the amount of variation in record spin (short cycle).
Random
0–127
Sets the amount of non-cyclical variation in record spin.
Total W/F
0–127
Sets the volume of variation in record spin overall.
Balance
D100: 0W-D0: 100W
Sets the volume balance between the original sound (D) and the effect sound (W).
Level
0–127
Sets the output volume.