MFX Parameters
139
Dly1 Sync
If this is ON, the rate synchronizes with the tempo of the
rhythm.
Tempo (Pattern)
Delay time from when sound is input into the tap delay until
the delay sound is heard
Dly2 Sync
If this is ON, the rate synchronizes with the tempo of the
rhythm.
Tempo (Pattern)
Delay time from when sound is input into the tap delay until
the delay sound is heard
Dly3 Sync
If this is ON, the rate synchronizes with the tempo of the
rhythm.
Tempo (Pattern)
Delay time from when sound is input into the tap delay until
the delay sound is heard
Dly3 Fbk
Proportion of the delay sound that is to be returned to the
input of the tap delay (negative (-) values invert the phase)
Dly HF
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS
Frequency at which the hi-frequency content of the tap
delay sound will be cut (BYPASS: no cut)
Panning of the tap delay sounds
Volume of the tap delay sounds
Amount of boost/cut for the low-frequency range
Amount of boost/cut for the high-frequency range
Balance
Volume balance between the direct sound (D) and the delay
sound (W)
TimeCtrlDly (Time Control Delay)
A stereo delay in which the delay time can be varied smoothly.
Delay Sync
If this is ON, the rate synchronizes with the tempo of
the rhythm.
Tempo (Pattern)
To Next Page
Loading...
