Roland SH-4d - EP -> Delay (EP Amp Simulator -> Delay)

MFX Parameters
161
EP -> Delay (EP Amp Simulator -> Delay)
Parameter
Value
Explanation
Type
Type of amp
OLDCASE
A standard electric piano sound of the early 70s
NEWCASE
A standard electric piano sound of the late 70s and early 80s
Bass
-50–+50
Amount of low-frequency boost/cut
Treble
-50–+50
Amount of high-frequency boost/cut
Dly Switch
OFF, ON
Delay on/off
Delay
Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the
rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
D. Time
1–1300
Delay time from when the original sound is heard to when the
delay sound is heard
D.Time Nt
Note(P.167)
Dly Accel
0–15
Speed at which the current delay time changes to the specified
delay time when you change the delay time.
The speed of the pitch change will change simultaneously with
the delay time.
Delay Fbk
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into
the effect.
Negative (-) settings will invert the phase.
Dly HF
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
Frequency at which the high-frequency portion of the delay
sound will be cut (BYPASS: no cut)
Dly Bal
D100: 0W–D0: 100W
Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent through
the delay (D).
Sp Type
LINE, OLD, NEW, WURLY, TWIN
Type of speaker
If LINE is selected, the sound will not be sent through the
speaker simulation.
OD Switch
OFF, ON
Overdrive on/off
OD Gain
0–127
Overdrive input level
OD Drive
0–127
Degree of distortion
Also changes the volume.
Level
0–127
Output Level