Roland SH-4d - Pattern Utilities

Creating a Pattern (Step Sequencer)
68
Pattern Utilities
1. Hold down the [SHIFT] button and press the [14] button.
The PATTERN UTILITY screen appears.
2. Use the [1] or [2] knob or press the [ä] [å] buttons to select the item.
3. To execute the operation, press the [ENTER] button.
Item
Explanation
DUPLICATE STEPS
(PART)
Duplicates the content of the step sequencer for the selected part, which doubles the number of
steps.
* A part can contain up to 64 steps after its content is doubled.
DUPLICATE STEPS (PTN)
Duplicates the content of the step sequencer for all parts, which doubles the number of steps of each
part.
* A part can contain up to 64 steps after its content is doubled.
CLEAR MOTION
Erases all recorded knob motions for the selected part.
RANDOMIZE STEPS
Randomly overwrites the step sequencer for the selected part.
INITIALIZE PATTERN
Initializes the selected pattern.