Creating a Pattern (Step Sequencer)
67
Switches the last step settings on/off.
From 1 to (value set in STEP
LENGTH)
This specifies any step besides the first and last step to be played back as
the last step.
Sets the panning of each part’s sound when using stereo output.
Sets the overall pattern volume.
Specifies how polyphony resources are allocated to each part.
The track is given priority for the specified number of voices.
* The number of voices used differs depending on the sound.
The effect send (level) for each instrument in part R is the value of the effect send on this screen multiplied by the value of the
effect send for each instrument, which is set using the knob.
To Next Page
Loading...
