Roland SH-4d - Hexa-Chorus

MFX Parameters
109
Hexa-Chorus
Uses a six-phase chorus (six layers of chorused sound) to give richness and spatial spread to the sound.
Parameter
Value
Explanation
Pre Delay
0.0–100 [ms]
Adjusts the delay time from the direct sound until the chorus sound is heard.
Rate Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Rate
0.05–10.00 [Hz]
Frequency of modulation
Rate Note
Note(P.167)
Depth
0–127
Depth of modulation
PreDly Dev
0–20
Adjusts the differences in Pre Delay between each chorus sound.
Depth Dev
-20–+20
Adjusts the difference in modulation depth between each chorus sound.
Pan Dev
0–20
Adjusts the difference in stereo location between each chorus sound.
0: All chorus sounds will be in the center.
20: Each chorus sound will be spaced at 60 degree intervals relative to the center.
Balance
D100: 0W–D0: 100W
Volume balance between the direct sound (D) and the chorus sound (W)
Level
0–127
Output Level