Roland SH-4d - Trem Chorus (Tremolo Chorus)

MFX Parameters
110
Trem Chorus (Tremolo Chorus)
This is a chorus effect with added Tremolo (cyclic modulation of volume).
Parameter
Value
Explanation
Pre Delay
0.0–100 [ms]
Adjusts the delay time from the direct sound until the chorus sound is heard.
Cho Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
C.Rate
0.05–10.00 [Hz]
Modulation frequency of the chorus effect
C.Rate Nt
Note(P.167)
Cho Depth
0–127
Modulation depth of the chorus effect
Trm Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
T.Rate
0.05–10.00 [Hz]
Modulation frequency of the tremolo effect
T.Rate Nt
Note(P.167)
Trm Separate
0–127
Depth of the tremolo effect
Trm Phase
0–180 [deg]
Spread of the tremolo effect
Balance
D100: 0W–D0: 100W
Volume balance between the direct sound (D) and the tremolo chorus sound (W)
Level
0–127
Output Level