MFX Parameters
98
Auto Wah
Cyclically controls a filter to create cyclic change in timbre.
Mode
LPF: The wah effect will be applied over a wide frequency range.
BPF: The wah effect will be applied over a narrow frequency range.
Center frequency at which the wah effect is applied
Peak
Width of the frequency region at which the wah effect is applied
Increasing this value will make the frequency region narrower.
Sensitivity with which the filter is modified
Polarity
Direction in which the filter will move
UP: The filter will change toward a higher frequency.
DOWN: The filter will change toward a lower frequency.
Rate Sync
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Depth at which the wah effect is modulated
Adjusts the degree of phase shift of the left and right sounds when the wah effect is applied.
Amount of boost/cut for the low-frequency range
Amount of boost/cut for the high-frequency range
Humanizer
Adds a vowel character to the sound, making it similar to a human voice.
Drive
Degree of distortion
Also changes the volume.
Rate Sync
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Rate
Frequency at which the two vowels switch