Roland SH-4d - Auto Pan; Slicer

MFX Parameters
116
Auto Pan
Cyclically modulates the stereo location of the sound.
Parameter
Value
Explanation
Mod Wave
TRI, SQR, SIN, SAW1, SAW2, TRP
Modulation Wave
TRI: Triangle wave
SQR: Square wave
SIN: Sine wave
SAW1/2: Sawtooth wave
TRP: Trapezoidal wave
Rate Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Rate
0.05–10.00 [Hz]
Frequency of the change
Rate Note
Note(P.167)
Depth
0–127
Depth to which the effect is applied
Low Gain
-15–+15 [dB]
Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB]
Amount of boost/cut for the high-frequency range
Level
0–127
Output Level
Slicer
By applying successive cuts to the sound, this effect turns a conventional sound into a sound that appears to be played as a
backing phrase.
This is especially effective when applied to sustain-type sounds.
Parameter
Value
Explanation
Step 1–16
0–127
Level at each step
Rate Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)