Switching Between Patterns
19
Using the [2] knob to switch patterns
1.
On the PATTERN screen, turn the [2] knob to make the button ([1]–[16]) blink that corresponds to the
pattern you want to select.
Turn the [2] knob while holding down the [SHIFT] button to switch between banks.
2.
When playing back the pattern, press the [ENTER] button to confirm the pattern.
Using the pattern browser to switch between patterns
1.
Press the [ENTER] button on the PATTERN screen.
The PATTERN BROWSER screen appears.
2.
Use the [1] or [2] knob or press the [ä] [å] buttons to select the pattern.
The unit automatically switches to the pattern you select once the current pattern finishes playing back.
To save the settings for a pattern you edit, execute the write operation.
For details on how to save a pattern, refer to “Saving a Tone/Pattern (WRITE MENU)(P.73)”.
To Next Page
Loading...
