Roland SH-4d - Page 39

Creating a Tone
39
Item
Value
Explanation
Cutoff Velo
Sense
-100–
+100
Sets how much the cutoff frequency changes according to how hard you play the keys.
Positive values make the cutoff frequency increase when you play the keys harder, and negative
values make the cutoff frequency decrease.
BendRange
Up
0–48
Sets how much the pitch changes (in semitones) when the [PITCH +] button is pressed.
For instance, a setting of “48” makes the pitch bend up four octaves when you press the [PITCH +]
button.
BendRange
Dw
0–48
Sets how much the pitch changes (in semitones) when the [PITCH -] button is pressed.
For instance, a setting of “48” makes the pitch bend down four octaves when you press the [PITCH -]
button.
Env Mode
ADR,
ADSR
ADSR: Once the envelope passes its decay time, it stays at the sustain level until the note is released
(note off). When the note is released, the envelope then goes to its release segment from the
current position.
ADR: Regardless of when you release the note (note off), the envelope goes to its release segment
once the decay time has passed, and the envelope operates according to its set time.
Catg
–
Sets the category for the tone.