Copying and Pasting the Content of Patterns
70
Pasting the Data
1.
Follow the steps in “Selecting and Playing a Pattern(P.52)” to select the copy destination pattern.
2.
Hold down the [SHIFT] button and press the [1]–[5] buttons to select the copy destination part.
3.
Follow steps 1–2 in “Copying the Data” to select the copy source.
4.
Press the [å] button to execute the paste operation.
When the copy source is MULTI-STEP, the SELECT STEPS screen appears.
Use the [1] knob or the [2] knob to select the starting step number, and press the [ENTER] button to execute the paste
operation.
To Next Page
Loading...
