Roland SH-4d - Page 92

MFX Parameters
92
Parameter
Value
Explanation
M Mid1 F
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Frequency of the middle range 1
M Mid1G
-12.00–+12.00 [dB]
Gain of the middle range 1
M Mid1 Q
0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 1
Set a higher value for Q to narrow the range to be affected.
M Mid2 F
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Frequency of the middle range 2
M Mid2G
-12.00–+12.00 [dB]
Gain of the middle range 2
M Mid2 Q
0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 2
Set a higher value for Q to narrow the range to be affected.
M Mid3 F
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Frequency of the middle range 3
M Mid3G
-12.00–+12.00 [dB]
Gain of the middle range 3
M Mid3 Q
0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 3
Set a higher value for Q to narrow the range to be affected.
M High F
2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000,
12500, 16000 [Hz]
Frequency of the high range
M HighG
-12.00–+12.00 [dB]
Amount of boost/cut for the high-frequency range
S EQ
Switch
OFF, ON
Switches whether to apply tonal adjustment to left/right
input signals whose phase is distant (opposite phase).
S In G
-12.00–+12.00 [dB]
Volume of left/right signals whose phase is distant (opposite
phase)
S Low F
20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250,
315, 400 [Hz]
Frequency of the low range
S Low G
-12.00–+12.00 [dB]
Amount of boost/cut for the low-frequency range
S Mid1 F
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Frequency of the middle range 1
S Mid1G
-12.00–+12.00 [dB]
Gain of the middle range 1
S Mid1 Q
0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 1
Set a higher value for Q to narrow the range to be affected.
S Mid2 F
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Frequency of the middle range 2
S Mid2G
-12.00–+12.00 [dB]
Gain of the middle range 2
S Mid2 Q
0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 2
Set a higher value for Q to narrow the range to be affected.
S Mid3 F
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Frequency of the middle range 3
S Mid3G
-12.00–+12.00 [dB]
Gain of the middle range 3
S Mid3 Q
0.5, 1.0, 2.0, 4.0, 8.0
Width of the middle range 3
Set a higher value for Q to narrow the range to be affected.
S High F
2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000,
12500, 16000 [Hz]
Frequency of the high range
S HighG
-12.00–+12.00 [dB]
Amount of boost/cut for the high-frequency range
Level
0–127
Output Level