Rosemount 2088 - A.1.7 Transient Protection (Option Code T1); A.2 Functional Specifications; A.2.1 Service; A.3 Pressure Range Values

29
Reference Manual
00809-0100-4108, Rev CA
Hardware Installation
March 2017
Hardware Installation
Section 3 Hardware installation
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29
Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30
Installation procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 31
Rosemount 306 Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 40
3.1 Overview
The information in this section covers installation considerations for the Rosemount
™
2088,
2090F, and 2090P, 2090F, and 2090P with HART
®
protocols. A Quick Start Guide is shipped
with every transmitter to describe recommended pipe-fitting and wiring procedures for
initial installation. Dimensional drawings for each transmitter variation and mounting
configuration are included on page 31.
Note
For transmitter disassembly and reassembly refer to “Disassembly procedures” on page 70,
and “Reassembly procedures” on page 72.
3.2 Safety messages
Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operation. Information that raises potential safety
issues is indicated by a warning symbol ( ). Refer to the following safety messages before
performing an operation preceded by this symbol.