Rosemount 2088 - 2.8.3 Damping; 2.9 Configuring the LCD Display; 2.10 Detailed Transmitter Setup; 2.10.1 Configuring Alarm and Saturation Levels

5
Reference Manual
00809-0100-4108, Rev CA
Configuration
March 2017
Configuration
2.3 HART installation flowchart
Figure 2-1. HART
®
Installation Flowchart
START HERE
Bench
Calibration?
Field Install
No
Set Units
(
page 13)
Set Range Points
(
page 13)
Select Linear
Output
(
page 13)
Set Damping
(
page 16)
Verify
Apply Pressure
Yes
Within
Specifications?
Yes
No
Refer to
Section 5: Operation
and maintenance
Configure
Security and
Alarm
(page 43)
Mount Transmitter
(
page 31)
Wire Transmitter
(
page 47)
Power Transmitter
(
page 46)
Trim the
Tra nsmitter
(
page 56)
Done
Review Transmitter
Configuration
(
page 9)
Confirm Transmitter
Configuration
(
page 11)
Configure for
Pressure
Check Process
Connection
(
page 46)