Sartorius Cubis MCA10202S Series - Conformity-Assessed Devices; Symbols on the Device

14 Cubis
®
MCA Operating Instructions
Device Description
3.6 Conformity-assessed Devices
Some settings of conformity-assessed models are protected against user changes,
e.g. “external calibration” for devices in accuracy class II. This measure is intended to
ensure the suitability of the devices for use in legal metrology.
3.7 Symbols on the Device
1
Fig. 6: ID label on the device (example)
Pos. Designation Description
1 Manufacturer’s ID label Displays the metrological data of the device.
Conformity-assessed models only