44 Cubis
®
MCA Operating Instructions
System Settings
7.4.3 Setting Up Device for Network Printer via Company Network
Requirements
− The device administrator or service rights are activated via user management.
− The company network has a DHCP server.
− The network printer is connected to the company network.
Procedure
t Open the “Settings / Connections / Network / Wi-Fi” menu.
t Press the [Edit] button.
t Enter the service set identifier for the company network under “Wi-Fi SSID”. The
service set identifier is available from the company network administrator.
t Enter the company network password under “Wi-Fi password”. The password is
available from the company network administrator.
t Press the [Back] button.
y The status “Ready” appears in the “Wi-Fi” overview display within 10 seconds.
Creating a Network Printer
Procedure
t Open the “Settings / Connections / Connectors / YDP30-NET” menu.
t Press the [New] button.
t Enter a name for the network printer under “Connector name”, e.g. printer
YDP30-NET.
t Enter the network printer “HOST NAME” under “IP or host”. The HOST NAME of
the computer is specified in the network printer “Network Settings” printout.
t If connection with the host name is delayed: Enter the network printer IP address
under “IP or host”. The IP address of the computer is specified in the network
printer “Network Settings” printout.
t Confirm the entries. In order to do so, press the [OK] button.
t If the IP address changes depending on the DHCP network settings: Enter the
new IP address of the network printer again.
7.4.4 Configure Print Profile
Procedure
t Open the “Settings” / Weighing and Print Profile / YDP30” menu.
t Edit a pre-configured print profile or create a new print profile by pressing the
[New] button, e.g. network printer YDP30-NET.
t Follow the wizard’s instructions in the operating display for more settings.
t Confirm the entries. In order to do so, press the [OK] button.
t Add the created print profile to a task (see Chapter “8.5 Adding Weighing and
Print Profiles to a Task”, page 60).
To Next Page
Loading...
Need help?
General