Cubis
®
MCA Operating Instructions 69
Cleaning and Maintenance
9.6 Performing a QAPP Center Update
The QAPP center update can be installed from a USB mass storage device using the
device’s USB-A connection.
Requirements
− The device is switched on.
− The QAPP center update is saved on a USB mass storage device.
Procedure
t Download the QAPP center update from the Sartorius website onto the USB mass
storage device.
t If this relates to a zip file: Unzip the software update on the stick. The files must
be saved at root level. The files must not be set aside in a folder.
t Insert the USB mass storage device with the software update into one of the
device’s USB-A connection sockets.
t Select the “Update Firmware” menu entry in the “Settings / Device Maintenance”
menu.
t Select “USB stick” as the connector.
t Tap on the desired update.
t Once the software update is complete: Confirm successful installation with the
[OK] button.
To Next Page
Loading...
Need help?
General