Cubis
®
MCA Operating Instructions 71
Decommissioning
11 Decommissioning
11.1 Decommissioning the Device
Procedure
t Turn the device off.
t Disconnect the device from the power supply.
t Disconnect the device from all connected devices and all accessories, e.g. printer.
t Clean the device (see Chapter 9.2, page 67).
t If below-balance weighing has been set up:
t Remove the hook for below-balance weighing from the thread (1).
t Insert the hook for below-balance weighing back into its retainer on the
underside of the weighing module.
t Re-insert the cover (2) of the below-balance weighing equipment.
12 Transport
12.1 Transporting the Device
Procedure
t Only lift the device by its base.
t When lifting and transporting, ensure that no personnel or objects are in
the way.
t Get help from additional persons when lifting and transporting the device.
t Use suitable conveyance devices, e.g. trolleys, for long transport routes.
2
1
To Next Page
Loading...
Need help?
General