Sartorius Cubis MCA10202S Series User Manual

Cubis
®
MCA Operating Instructions 57
System Settings
7.5.21 Parameters in the “Device Settings / Display Properties” Menu
Parameter Settings Explanation
Display brightness Bright Sets the lighting intensity on the operating display to “bright”.
Medium Sets the lighting intensity on the operating display to “medium”.
ECO mode* Activates eco mode. For longer periods of downtime, the operating display
darkens automatically.
On/off switch Standby mode* The [Standby] button switches the device into standby mode. The device
can be reactivated by pressing the [Standby] button.
Off The [Standby] button switches the device off. The device must be
reactivated by pressing the ON key.
Color scheme Sartorius Standard* If the QAPP extension has been activated: Selects the color scheme for the
“Sartorius Standard” operating display. Additional color schemes can be
unlocked via the QAPP center.
* Factory setting
7.5.22 Parameters in the “Device Settings / Sound (Loudspeaker)” Menu
Parameter Settings Explanation
Touch sounds Activated Deactivates the acoustic signal for touch and keypad operation.
Deactivated* Activates the acoustic signal for touch and keypad operation.
Message sounds Activated Deactivates the acoustic signal for messages.
Deactivated* Activates the acoustic signal for messages.
Sound for end-of-
action
Activated Deactivates the acoustic signal for the completion of an action.
Deactivated* Activates the acoustic signal for the completion of an action.
* Factory setting
7.5.23 Parameters in the “Device Maintenance” Menu
Parameter Settings Explanation
Update firmware Starts a firmware update.
Not for conformity-assessed devices.
Update QAPP Center USB stick Updates the QAPP center using the connected USB stick.
Update customized
QAPP
USB stick Updates the customized QAPP using the connected USB stick.
Backup device settings USB stick Saves the device data on a connected USB stick.
Restore device settings USB stick Loads the device data from a connected USB stick.
Export device data Role management
Saves device role management for an administrator, user, or guest on a
connected USB stick.
User management
Saves device user management for an administrator, user, or guest on a
connected USB stick.
Import device data USB stick
Loads the device data from a connected USB stick.
Restore factory settings Resets the device to factory settings and deletes all configurations. The
audit trail and data memory will be retained.
Create diagnostic file
Saves information about device configuration and operation on a
connected USB stick.

Sartorius Cubis MCA10202S Series Specifications

General

Brand	Sartorius
Model	Cubis MCA10202S Series
Category	Scales
Language	English