82 Cubis
®
MCA Operating Instructions
Accessories
16 Accessories
16.1 Accessories
This table contains an excerpt of the accessories that can be ordered. For information
on other products, contact Sartorius.
16.1.1 Printers and Communication
Item Quantity Order number
Thermal transfer | thermal printer for GLP / GMP
printouts on continuous paper and labels
1 YDP30
Thermal transfer | thermal network printer with
Ethernet connection for GLP / GMP printouts on
continuous paper and labels
1 YDP30-NET
Wireless nano USB adapter for company network or
independent Wi-Fi network, e.g., operation with a
Sartorius network printer YDP30-NET (only for
Europe)
1 YWLAN01MS
Wireless nano router, e.g., for Sartorius network
printer YDP30-NET for operation in an independent
Wi-Fi network (only for Europe)
1 YWLAN02MS
Display cable, 3 m, for separate installation of display
and weighing units, installation by Sartorius Service
or at the factory
1 VF4754
Installation of display cable, 3 m, for separate
installation of display and weighing units
1 VF4016
RS232C connection cable, 9-pin, 3 m, for connection
to a PC with 9-pin COM interface
1 VF4761
USB QR barcode scanner 1 YBR05
Sartorius Wedge, software for data communication
between the PC and device
1 YSW02
16.1.2 Displays and Input / Output Elements
Item Quantity Order number
MCE operating display with color TFT display and
touch screen
1 69MS0128
Motion sensor for triggering a maximum of 4 func-
tions via gesture control, selection via menu
1 YHS02MS
To Next Page
Loading...
Need help?
General