Cubis
®
MCA Operating Instructions 27
Operating Concept
4.11 User Management
4.11.1 User Profiles
In the factory, 4 user profiles are created for the device. One role is assigned to each
user profile. Each role has rights to operate the device. The rights assigned to each
role depend on which device functions the user has to use. User profiles can be
adapted.
Additional user profiles, roles, and rights may be activated in the QAPP center.
4.11.2 User Login
The user must log in to the login display with a user profile. Various setting options
and tasks are displayed in the operating display depending on the user profile and
role.
4.12 Weighing and Print Profiles
Weighing and print profiles can be created. These profiles can be assigned to a task.
Preset profiles can be used in a task. The preset profiles can be adjusted individually
to the application and saved in new profiles for weighing and printing.
4.13 Tasks and Applications
Device functions such as weighing or calibration and adjustment are carried out
using tasks. Applications must be assigned to a task.
A task is visible to all users who are approved for this task.
The device is supplied with some freely accessible applications in the “Essentials”
QAPP package which can be used to carry out the most important functions.
Additional applications can be unlocked via the QAPP center for a fee.
To Next Page
Loading...
