Sartorius Cubis MCA10202S Series User Manual

4 Cubis
®
MCA Operating Instructions
Contents
7.5.9 Parameters in the “Connections /
Interfaces / Serial Communication
via Network” (Ethernet) Menu ............52
7.5.10 Parameters in the “Connections /
Interfaces / COM-RS232 Interface” Menu ...53
7.5.11 Parameters in the “Connections /
Interfaces / USB-B Interface” Menu ........53
7.5.12 Parameters in the “Connections /
SBI Protocol” Menu .....................54
7.5.13 Parameters in the “Connections /
Climate Module” Menu ..................54
7.5.14 Parameters in the “Connections /
Connected Devices / Motion Sensor” Menu
(Only for Connected Motion Sensors) ......54
7.5.15 Parameters in the “Device Settings /
Date and Time” Menu ...................55
7.5.16 Parameters in the “Device Settings /
Safe Weighing” Menu ...................55
7.5.17 Parameters in the “Device Settings /
minUSP” Menu . . . . . . . . . . . . . . . . . . . . . . . . . 56
7.5.18 Parameters in the “Device Settings /
Device ID” Menu........................56
7.5.19 Parameters in the “Device Settings /
Electronic Signature” Menu ..............56
7.5.20 Parameters in the “Device Settings /
Start-up Behavior” Menu ................56
7.5.21 Parameters in the “Device Settings /
Display Properties” Menu ................57
7.5.22 Parameters in the “Device Settings /
Sound (Loudspeaker)” Menu ..............57
7.5.23 Parameters in the “Device Maintenance”
Menu .................................57
8 Operation ........................................58
8.1 Switching the Device On and Off ...............58
8.2 Logging Users In and Out ......................58
8.3 Leveling the Device ...........................59
8.3.1 Level Device with Motorized Leveling Feet ..59
8.4 Activating Applications and Adding a Task .......59
8.4.1 Activating Applications . . . . . . . . . . . . . . . . . . 59
8.4.2 Adding an Application to a Task...........60
8.5 Adding Weighing and Print Profiles to a Task .....60
8.6 Preparing Weighings..........................60
8.7 Weighing ...................................61
8.8 Overview of Calibration, Adjustment, and
Linearization ................................61
8.9 Adjusting with the isoCAL Function .............62
8.10 Internally Calibrating and Adjusting the Device ...63
8.11 Weighing and Printing with ID Marking..........63
8.11.1 Saving Values for Printouts...............63
8.11.2 Marking Saved Values as Invalid...........64
8.11.3 Marking Saved Values as Valid ............64
8.11.4 Printing Saved Values ...................64
8.11.5 Exiting the Task.........................64
8.12 Viewing the Data Storage Device ...............65
8.13 Running Applications (Examples) ...............65
8.13.1 Executing the “Unit Change” Function .....65
8.13.2 Running the “Statistics” Application .......66
9 Cleaning and Maintenance.........................67
9.1 Preparing the Device..........................67
9.2 Cleaning the Device ..........................67
9.3 Assembling and Connecting the Device ..........68
9.4 Maintenance Schedule ........................68
9.5 Performing a Software Update .................68
9.6 Performing a QAPP Center Update ..............69
10 Malfunctions .....................................70
10.1 Warning Messages............................70
10.2 Troubleshooting..............................70
11 Decommissioning .................................71
11.1 Decommissioning the Device ...................71
12 Transport ........................................71
12.1 Transporting the Device .......................71
13 Storage and Shipping .............................72
13.1 Storage .....................................72
13.2 Returning Device and Parts ....................72
14 Disposal..........................................73
14.1 Information on Decontamination . . . . . . . . . . . . . . . 73
14.2 Disposing of Device and Parts ..................73
14.2.1 Information on Disposal .................73
14.2.2 Disposal ...............................73
15 Technical Data....................................74
15.1 Dimensions and Weight .......................74
15.2 Ambient Conditions ..........................74
15.2.1 Installation Site.........................74
15.2.2 Ambient Temperature for the
isoCAL Function ........................75
15.2.3 Protection Class ........................75
15.3 Power Supply ................................75
15.3.1 Device ................................75
15.3.2 Power Supply Unit ......................75
15.3.3 Safety of Electrical Equipment ............76
15.3.4 Electromagnetic Compatibility ............76
15.4 Materials....................................76
15.5 Integrated Clock .............................76
15.6 Backup Battery ..............................76
15.7 Metrological Data ............................77
15.7.1 Models MCA14202S | MCA14202P |
MCA10202S | MCA8202S .................77
15.7.2 Models MCA6202S | MCA6202P |
MCA4202S | MCA2202S ..................78
15.7.3 Models MCA1202S | MCA12201S |
MCA8201S | MCA5201S ..................79

Sartorius Cubis MCA10202S Series Specifications

General

Brand	Sartorius
Model	Cubis MCA10202S Series
Category	Scales
Language	English