Section12ELECTRICALSYSTEM
Subsection 04 (INSTRUMENTS AND ACCESSORIES)
Message Display
The information center features a display area that
blinks a message whenever one of the following
circumstances occurs:
• fuel injection system sensors and major com-
ponents (MAINT) (DI models)
• compass error (COMPAS) (if so equipped)
• maintenance (MAINT)
• engine overheating (H-TEMP)
• low fuel (FUEL-LO)
• low oil (OIL LOW)
• low voltage (12 V LOW).
A buzzer will sound when one of the four last cir-
cumstances occurs.
Except for low fuel and low oil, which can be cor-
rected by refilling, it is recommended to see an au-
thorized SEA-DOO dealer when other messages
occur.
The warning light will blink at the same time.
Warning Light
The red warning LED (Light-Emitting Diode) blinks
along with the message display to catch your at-
tention.
Fuel Level Display
Bar gauge continuously indicates the amount of
fuel in the fuel tank while riding. A low-fuel con-
dition is also indicated when it occurs. See MES-
SAGE DISPLAY above.
VTS Position Indicator
XP DI Models
The VTS position indicator shows the riding angle
of the watercraft.
F00L2DA
1
2
3
1. Position indicator
2. Bow up
3. Bow down
Display Priorities
As a self test, all LCD segments and the LED
will turn on for 3 seconds each time the informa-
tion center is activated (when safety lanyard is in-
stalled).
When the information center is activated, the
last function set will be displayed if it was the
tachometer, speedometer or chronometer. If
another function was set, the compass will be
displayed. On models without the compass
function, the word “Sea Doo” will be displayed.
In the event of a warning message, the message
will blink and override the units display.
If more than one warning message occurs, the
blinking messages will scroll every 4 seconds.
Other Functions
The following describes how to select other avail-
able functions.
Language Option
While in the compass mode (while “SeaDoo” is
displayed on models without compass):
594 smr2004-Complete Line Up