| 4 - Instruction manual
Sound Profiles
• Off: No sound profile is activated.
• Female Speech: Recommended sound profile for female speakers.
• Male Speech: Recommended sound profile for male speakers.
• Media: Recommended sound profile for other audio devices.
• Custom: 7-band equalizer for manually adjusting the sound settings.
Sensitivity
• Automatic: The audio sensitivity is automatically adjusted during speech.
• 0 dB ... -30 dB: The audio sensitivity can be manually adjusted in increments of 6 dB
between 0 dB and -30 dB.
Audio Output
• Level: Slider for adjusting the audio output level of the XLR socket between Mic Level
and Line Level.
• This setting does not affect the RCA output. This output always issues a line signal.
Audio Default
• Yes: Resets the audio settings (Low Cut and Sound Profiles) to the factory defaults.
• No: Keeps the current audio settings.
The System Settings menu
The System Settings menu at menu level 1 allows you to adjust the following settings.
Display Brightness
• Level: Slider for adjusting the display brightness.
Mute Mode
• Active: The MUTE switch of the paired transmitter is activated and can be used.
• Deactivated: The MUTE switch of the paired transmitter is deactivated and cannot be
used.
• Push to talk: Press and hold the MUTE switch of the paired transmitter to activate the
audio signal (for SL Boundary 114-S DW and SL Tablestand 133/153-S DW only).
• Push to mute: Press and hold the MUTE switch of the paired transmitter to mute the
audio signal (for SL Boundary 114-S DW and SL Tablestand 133/153-S DW only).
96
To Next Page
Loading...
