| 4 - Instruction manual
Auto Lock
• On: The automatic lock mode is activated. If no button is actuated on the receiver for
approx. 10 seconds, the lock mode is automatically activated.
• Long-press the jog dial to temporarily deactivate the lock mode.
• The automatic lock mode is deactivated.
RF Power
• Automatic: The transmission power is automatically adjusted.
• Level 1 ... 5: The transmission power can be manually reduced in 5 steps. This
function is required for operation in Multi-Room Mode.
Walk Test
• Starts the walk test. See Performing a walk test (reception quality)
Factory Reset
• Yes: All settings are reset to the factory defaults.
• No: The settings are retained.
System Info
• Displays the serial number and the current firmware version of the receiver.
The Network Settings menu
The Network Settings menu at menu level 1 allows you to adjust the following settings.
Mode
• Automatic: The IP address is automatically assigned using DHCP. If no DHCP server is
available, the IP address is assigned by the SL Rack Receiver DW itself.
• Fixed IP: The IP address has to be entered manually.
mDNS
• Disabled: Deactivates mDNS to reduce the data volume transferred across the
network. This option is recommended for larger systems.
• Enabled: Activates mDNS to allow for automatic device detection. This option is
recommended for smaller systems with up to 30 devices.
IP
• Input of the IP address in Fixed IP mode
97
To Next Page
Loading...
