SGM Technology for lighting GB
Pilot 3000 Us
er’s Manual 1.00
- 107 -
The Open key allows to assign the White color to A whilst the Red key assigns the Red color to B. In
this way our effect will oscillate from White to Red.
The operator can freely choose an inverse assignment, which is th Red olor for the starting limit A
and the White for the B value. Apparently nothing changes until w en you don’t intervene with the
“SPREAD” parameter. The different assignment of same v lu s A and B causes a different
‘behaviour’ of the effect in case a “SPREAD” value lower th n 100% (default value) is applied.
Modify the SPEED value to get the effect’s speed desired.
Choose the phase displacement type to apply a specifi seq ential order to the effect.
Scegliere inoltre il tipo di sfasamento per applicare una pecif ca sequenzialità all’effetto stesso.
To Next Page
Loading...