26
Multi
Scan Setting
This function allows the software to automatically identify and control all
the projectors connected to the PC without having to the ports and
models. To use this function, the COM ports and IP address to be scanned
with “Scan Setting” must be set beforehand.
For details and setting of “Scan Setting” see below.
1 Select “Scan Setting” from the “File” menu.
Set the projectors to be scanned here.
1 COM port enable/disable check box
The serial number is assigned when using multiple connections
which do not use IDs.
2 Set the COM port Transmission Speed.
3 IP address input area
4 List of input IP addresses and enable/disable check box
5 Add button
When clicked after inputting the IP address, the address is added to
the list in 4.
6 Delete button
When clicked after selecting the IP address in 4, that address is
deleted.
7 List of projectors whose IDs are redundant.
8 List of projectors whose IDs are missing.
9 Scan button
0 OK button
q Cancel button
1
8
56 9 0 q
7
2
4
3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
