73
Adjusting and
Controlling
Multi
5 Select the projector in the Projector selection area.
6 Click “Assign”.
The projector is assigned as a video wall component.
7 Click “Transmit”.
To fine-adjust the vertical and horizontal position
1 Select the image you want to fine-adjust in “Position
Assignment”.
2 Adjust the image position using ', ", \ and | buttons.
To reset the current assignment settings
1 Select the projectors whose assignment you want to
cancel in “Projector Selection area”.
2 Click “Reset & Transmit”.
The Video Wall Setting of the selected projectors is canceled.