88
Single
Quick Transfer
By applying the preset compression rate, this mode allows you to transfer
images using simple steps.
● This function does not work with the following models:
XG-P20X, XG-P25X, XG-V10X, XG-V10W, XG-NV1-4
● This mode transfers images under the following settings which cannot
be modified.
• Normal picture quality
• Compression rate: Middle
The custom image used as Startup Image and Background Image
cannot be transferred in this mode.
Before Presentation
● Confirm that the “Auto-Launch” setting is “ON” (page 22) or the
software is active.
● This function is available for full screen slides (e.g. the “Slide Show”
mode of Microsoft PowerPoint).
1 Display the image you want to transfer.
2 Hold the right mouse button down for 2 seconds.
The position of the pointer can be anywhere on the display.
| The “Quick Transfer” window opens.
On the projector side, the screen is automatically set to the CUSTOM
mode.
For NV5/6/7 users:
The projector must be in IrCOM mode to receive the images. Press the
“IrCOM” button on the projector or the remote control.