3
Foreword
This software is designed for presentations and for enhancement of
images projected from SHARP projectors. It includes the following
functions:
Projector Control Software:
Network Control
This function allows you to control the projector’s functions/
adjustments from your PC.
A maximum of 250 projectors or grouped projectors can be controlled
from a central PC/CONTROLLER.
The Video Wall function, which normally requires expensive devices,
can be performed without purchasing additional hardware.
When the backup function is used, the projector standing by as the
backup projector automatically turns on if an error occurs in the other
projector(s).
Image Enhancement Software:
Gamma Correction
This function allows you to set the projector’s Gamma values directly
from your PC. The ease of specifying preset values enables precise
custom brightness, contrast and color adjustments.
Please note that this function can only be performed via a Network
(COM and LAN port).
Support Software for Presentations:
Presentation Transfer
This mode transmits BMP and JPEG images to the projector. By
saving presentation slides as BMP or JPEG images, you can do an
entire presentation wirelessly.
Capture & Transfer
This mode allows you to transmit an image currently displayed on
your monitor. As simple as clicking the “Capture & Transfer” button
in the application.
Quick Transfer
This mode is similar to “Capture & Transfer” but it can easily be used
by clicking the “Right” mouse button.
● Wireless image transfer can only be used with the XG-NV5/6/7.
Wireless image transfer cannot be used to transfer images with other
models.
● The following models do not support JPEG image transfer:
XG-P20X, XG-P25X, XG-V10X, XG-V10W.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
