44
Multi
E-mail Sending Function
This software makes it possible to automatically send an e-mail message
containing information concerning errors to a preset e-mail address
should projector errors be detected. In addition to automatically sending
e-mail messages when errors arise, it is also possible to periodically
send e-mail messages containing information on the projector status.
● The PC setting for e-mail (e.g., LAN connection setting or Dial-up
connection setting) at first is needed to use this function.
● The information is attached to the e-mail messages as files in CSV
format.
● This function can only be used when this software is running on a
personal computer.
● This e-mail is sent by connecting to the server through an SMTP
(Simple Mail Transfer Protocol).
Sender Setting
Make the e-mail sender’s settings here.
1 E-mail (SMTP) server name input area
2 Sender e-mail address input area
3 Sender name input area
4 Sender information input area
1
2
3
4