43
Adjusting and
Controlling
Multi
4 Input the password.
When the password has been set in the projector, the “Password
Input area” is displayed. Once displayed, enter the password.
5 Click “OK” or “Apply”.
● The “Projector Name” is a name for facilitating identification of the
individual projectors when controlling multiple projectors. We
recommend entering the projector’s model name, the place where it
is installed, etc., in “Projector Name”.
● The “Unique Name” does not affect projector control. It is protected
by the password set on page 37. (Only those who know the password
can change it.)
We recommend inputting the name of the projector’s owner, etc., at
“Unique Name”.
To Next Page
Loading...
