Sharp XG-P25X

39
Adjusting and
Controlling
Single Multi
Changing the Password
1 From the “Control Option” menu, select “Password”.
2 Enter the 4-digit old password using keyboard into “Old
Password” on the “Set Projector Password” dialog box.
When using the Multiple Projector Operation Mode, select the “ID
number” or “COM port number” before performing the above
operation.
3 Enter the 4-digit new password using keyboard into the
“New Password” and “Reconfirm” on the “Set Projector
Password” dialog box.
Check the “Save Password” check box if you want to save the
password.
4 Click “OK” .
The password setting is canceled when “OK” is clicked if nothing is
entered into the “New Password” and “Reconfirm” area.