Sharp XG-P25X User Manual

86
Single
Capture & Transfer
This mode allows you to transfer an image of what is currently displayed
on the PC monitor.
● This mode is only available in the “Single Projector Operation Mode”.
● If you use the NV5/6/7, infrared communications are available.
Before Presentation
● This function is not available for full screen slides (e.g. the “Slide
Show” mode of Microsoft PowerPoint).
For full screen slides to use Capture & Transfer, see the section
“Quick Transfer” (page 88).
1 Display the image you want to transfer.
2 Select the “Capture & Transfer” mode.
See section “Opening Modes” (page 20).
| The “Capture & Transfer” window will open.
Selecting the type of
“Transfer Mode” (step 3)
3 Select “Image Transfer” in “Transfer Mode”.
If you want to change the compression rate, see the section
“Changing Compression Rate” (page 81).
● For the details of the “Custom Image Transfer”, see pages 90,
91.
● Changing the compression rate will change the image picture
quality and transfer speed.

Sharp XG-P25X Specifications

General

Resolution	1024 x 768 pixels
Dimensions (WxDxH)	319 x 155 x 423 mm
Display diagonal	1.3 \
Noise level	37 dB
Contrast ratio (typical)	600:1
Lamp power	270 W
Light source type	Lamp
Service life of light source	1500 h
Number of built-in speakers	2
Market positioning	Portable

Weight and Dimensions

Weight	9700 g